Natural Village Oak

Waterproof, paintable skirting board to hide expansion joints and protect walls. Colour: white & paintable. Full polystyreen skirting for a complete waterproof finish.

2000 x 58 x 12 mm

Surface: wear and scratch-resistant. Core: MDF. Adaptable to 40 mm height. 8 straight and 8 corner connecting plugs included / pack (6 skirtings).

2400 x 12 x 58 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

Contents: 1 aluminium end profile (2000 x 24 x 8,5 mm) and 1 PVC subprofile

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

Contents: 1 aluminum adapter profile (2000 x 31 x 8,5 mm) and 1 PVC subprofile

Finish off your click floor perfectly.

2000 x 24 x 7 mm

T-moulding and reducer in one. Plastic bottom rail. Suitable for height differences of 0 - 12.3 mm.

1860 x 47 x 16 mm

Finish off your Pergo floor perfectly. Cut the full profile to your desired shape with the included knife.

2000 x 45 x 8 mm

Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium adapter profile (2000 x 27 x 7,5 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

Subtle and elegant profile in extra wear resistant aluminium. For use in commercial areas, with Pergo click or glue vinyl. Installation without subprofile. Screws and plugs included.

2000 x 20 x 7 mm

Subtle and elegant profile in extra wear resistant aluminium. For use in commercial areas, with Pergo click or glue vinyl. Installation without subprofile. Screws and plugs included.

2000 x 26 x 5 mm

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

Contents: 1 aluminium expansion profile (2000 x 32,5 x 7,5 mm) and 1 PVC subprofile.

Subtle and elegant profile in extra wear resistant aluminium. For use in commercial areas, with Pergo click or glue vinyl. Installation without subprofile. Screws and plugs included.

2000 x 24 x 7 mm

Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with both clicked Vinyl floors (less so with glued down 2.5mm floors). Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the expansion profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium expansion profile (2000 x 36,5 x 4 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

The Incizo® profile enables you to create stairs that fit perfectly into your interior. Various stair finishes are possible!

2000 x 33 x 17 mm

Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the end profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium end profile (2000 x 16,5 x 8 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

Finish off your click floor perfectly.

2000 x 18 x 7 mm

Finish off your click floor perfectly.

2000 x 26 x 7 mm

For installation of Pergo click vinyl on stairs and steps. Always glue the floor panels on the stairs of a staircase, for your safety!

2000 x 29 x 15 mm

Specifically developed for Pergo Vinyl Floors, the Pergo Vinyl Clean protects the TitanV™ top protective layer. Ideal for removing dirt, grease spots and heel marks, as well as for daily cleaning.

1000 ml

High quality mop set with extra long ergonomic handle and a mop cloth holder.

Contents: mop-cloth holder, high-quality mop

High-quality, transparent and elastic one-component silicone that creates an invisible and waterproof finishing around wallbases, mouldings, transitions, door frames, etc.

310 ml

Professional knife, perfect for precised and stable cutting. Ideal for cutting curves and shapes. 10 blades are included.

275 x 113 x 50 mm

Transparent strip on a roll for a waterproof finish of the scotia.

15000 x 8 x 5 mm

Excellent tool for precise cutting: straight and 90°. Hand protection with pullbar and lever function. Suited for both left and right handed.

410 x 190 x 16 mm

Repair wax. Repair the colour of damaged planks quickly and easily with wax in colours covering the Pergo wood palette. Contains 1 melting knife, 1 comb, addwaxional wax.

Contents: 1 melting knife, 1 comb, 7 wax blocks

Refill set for vinyl cutter knife. 4x10 blades per piece.

40 blades

Transparent strip on a roll for a waterproof finish of the standard skirting.

15000 x 5 x 5 mm

This multifunctional glue is specifically developed for all applications with the Pergo solutions. Ideal for installing wallbases and mouldings. Suitable for all materials and substrates. Hybrid polymer, cures quickly with very high final strength.

290 ml

Acrylic-based sealant for a beautiful finish of your floor, skirting boards or profiles. Dry in half an hour and fully cured after 24 hours. Available in 8 colours.

310 ml

Fill up expansion joints with the PE Foamstrip with adhesive backing.

15000 x 8 x 5 mm

This stainless steel cover will elegantly finish off the joints around heating elements and pipes.

diameter 22 mm

This stainless steel cover will elegantly finish off the joints around heating elements and pipes.

diameter 15 mm