Go to content Go to search

Expansion Profile - Silver

  • Vinyl Accessories
  • Expansion Profile
  • NEVEXPSILV
  • Profiles

Specifications

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

Dimensions
Height 7 mm
Length 2000 mm
Width 34 mm

Product data
Commercial code NEVEXPSILV

Similar accessories

  • End Profile Silver

    • Laminate Accessories
    • End Moulding, Silver
    • PGENPSILVME270
    • Suitable for height differences of 0 – 12.3 mm.
    • End Moulding, Silver

  • End Profile Silver 9,5 mm Floors

    • Laminate Accessories
    • End Profile Silver 9,5 mm Floors
    • NEENP9SILVME270
    • Aluminium profile, silver tone.
    • Aluminium profile, silver tone.

  • Stair Profile Silver

    • Laminate Accessories
    • Stair Profile, Silver
    • PGSTPSILVME250
    • Stair nose. Fits flooring thickness 7 – 15 mm. Colour: silver. Surface: aluminium.
    • Stair Profile, Silver

  • Commercial Low Ramp Profile Silver

    • Laminate Accessories
    • Low Ramp Profile
    • PGRPC55SILVME315A
    • Ramp profile (adaptor), no screws. Fits to flooring thickness of 8 - 9 mm. With EPDM moulding and plastic connectors. Surface: aluminium.
    • Low Ramp Profile

  • Pre-cut Corner for High Ramp Profile

    • Laminate Accessories
    • Pre-cut Corner for High Ramp Profile
    • PGRPC85CORNSILVME
    • Pre-cut Corner for High Ramp Profile, without screws. 90°
    • Pre-cut Corner for High Ramp Profile

  • Adapter Profile

    • Vinyl Accessories
    • Adapter Profile - Silver
    • NEVADPSILV
    • This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.
    • Adapter Profile

    • Laminate Accessories
    • Pre-cut Corner for Low Ramp Profile
    • PGRPC55CORNSILVMEA

  • Commercial End Profile Silver

    • Laminate Accessories
    • End Moulding, silver
    • PGENPCSILVME270
    • End moulding, Silver. Fits to flooring thickness of 9 and 10 mm. Surface: aluminium.
    • End Moulding, Silver

    • Laminate Accessories
    • Stair Profile Silver 9,5 mm Floors
    • NESTP9SILVME25

  • Multifunctional Profile Silver

    • Laminate Accessories
    • Combi moulding
    • PGPRSILV
    • T-moulding and reducer in one. Plastic bottom rail. Suitable for height differences of 0 - 12.3 mm.
    • Combi moulding

  • Commercial Ramp Profile Silver - Drilled

    • Laminate Accessories
    • Ramp Profile, Drilled
    • PGRPC80SILVME270
    • Ramp profile, drilled. Flexible in height. For flooring thickness (including underlay): 9 - 15 mm. Extremely resistant aluminium profile.
    • Ramp Profile, Drilled

  • Adapter Profile, commercial

    • Vinyl Accessories
    • Adapter Profile Commercial Use
    • NEVRADPCOMSILV
    • Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.
    • Adapter Profile Commercial Use

  • Commercial High Ramp Profile Silver

    • Laminate Accessories
    • High Ramp Profile
    • PGRPC85SILVME315
    • Ramp profile (adaptor), no screws. Fits to flooring constructions of 22 mm. With EPDM moulding and plastic connectors. Surface: aluminium.
    • High Ramp Profile

  • End Profile

    • Vinyl Accessories
    • End Profile - Silver
    • NEVENPSILV
    • This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.
    • End Profile

  • Commercial Expansion Profile Silver

    • Laminate Accessories
    • T-profile, silver
    • PGEXPCSILVME270
    • T-moulding, Silver. Flexible in height. Flooring thickness (including underlay): 7 - 12 mm. Surface: aluminium.
    • T-Moulding, Silver

  • End Profile Commercial Use

    • Vinyl Accessories
    • End Profile Commercial Use
    • NEVRENPCOMSILV
    • Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the end profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.
    • End Profile Commercial Use

Expansion Profile - Silver

  • Vinyl Accessories
  • Expansion Profile
  • NEVEXPSILV
City or zip code