Profiles for vinyl flooring

Finish off your Pergo floor perfectly. Cut the full profile to your desired shape with the included knife.

2000 x 45 x 8 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

Contents: 1 aluminium end profile (2000 x 24 x 8,5 mm) and 1 PVC subprofile

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

Contents: 1 aluminum adapter profile (2000 x 31 x 8,5 mm) and 1 PVC subprofile

T-moulding and reducer in one. Plastic bottom rail. Suitable for height differences of 0 - 12.3 mm.

1860 x 47 x 16 mm

Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium adapter profile (2000 x 27 x 7,5 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

Contents: 1 aluminium expansion profile (2000 x 32,5 x 7,5 mm) and 1 PVC subprofile.

Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with both clicked Vinyl floors (less so with glued down 2.5mm floors). Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the expansion profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium expansion profile (2000 x 36,5 x 4 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

The Incizo® profile enables you to create stairs that fit perfectly into your interior. Various stair finishes are possible!

2000 x 33 x 17 mm

Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the end profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium end profile (2000 x 16,5 x 8 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)